Tru-Fire 360 Buckle

Home > Archery > Releases & Release Aids >

Tru-Fire 360 Buckle

Our Price: $69.99

Availability: Usually Ships in 1 to 2 Business Days
Product Code: 360-B

Description

Both the 360 Elite and the regular 360 are dual caliper releases that incorporate 360 degree head rotation that is in front of the trigger. This allows you to rotate your hand and the trigger will always follow your index finger. Both models also have a set screw located on the head that gives you the option of locking the head in any location. The 360 Elites have a dial located inside the body that when adjusted will change the trigger pressure sensitivity (not trigger travel). The range of sensitivity is 4 to 26 ounces of pressure just by turning the dial. We positioned the dial inside the body but you are still able to adjust it with your fingers. (have a pic of the body blown up so you can see the dial clearly). All 360�s have trigger travel adjustment, length adjustment between the strap and head of over 1� and are 100% American Made.

Short body design

Foldback Evolution Buckle strap

TRU-ROTATION

The truth about 360 degree rotation: Many release companies say they have 360 degree rotation. What these companies are not telling you is the rotation is between the body of the release and the strap, which is virtually useless. At full draw with a release that rotates between the body and strap, if you rotate your wrist, you will not be able to reach your trigger because the trigger is still parallel to the ground. Our patented Classic Caliper line has a head and body that are independent of each other. This means you get full rotation in front of the body, not behind. Look for yourself, if your release has jaws and a trigger located in the same body or component, then your release is not a Tru-Rotater.

For a release to have Tru torque free rotation, the head of the release (where the jaws are located) and the body of the release (where the trigger is located) must be two separate components. To be truly torque free, the head of your release where the jaws are housed should be able to rotate independently of the body. Take a look at our Classic Caliper line to see the only Tru-rotating wrist models on the market. Note: Tru-Rotation is an extremely important feature when your release is directly attached to your bow's serving.

LENGTH ADJUSTMENT -- without tools!

If you want the finest, most precise length adjustment system in the industry - you've found it. Our system is able to adjust the length between the trigger and the strap by over 1". Within that inch there are 32 different length positions you can set. All this is done without the use of a tool. Just turn the head of the release or the black barrel behind the head and you are set. It's that simple. Length adjustment is important for proper index finger placement on your trigger. If your release is to long and you are reaching for the trigger, target panic can set in. Another situation is if you put a glove on under your release. Because of the thickness of the glove the trigger will now be to close to the strap. With our system, just turn the head and your adjustment is made.

INNOVATIVE STRAPS

Our wrist straps are unique because we use a system called the "Continuous Loop". No more fumbling around with both hands trying to get your wrist strap on. Unlike V straps, our strap when taken off your hand resembles a loop. To put your release back on, slide your hand through the loop and tighten. This system makes putting your release over gloves a breeze. Our straps are also tapered at specific locations to fit your hand for hours of comfort. Go ahead, try it; we know you will be impressed.